CEJN 10-364-6404

Product images are for illustrative purposes only and may differ from the actual product.

Product Information

SKU
10-364-6404
Vendor
Cejn

Product Summary

Cejn

Regular price $61.19 USD
Sale price Regular price $52.96 USD MSRP Unit price $61.19 USD
Shipping calculated at checkout.
Product Details

Category Nipples with pressure eliminator
Description Class Female thread
Connection 3/8" NPT
Length 75.9 mm
Diameter 28 mm
Hexagon 25 mm
Seal NBR

CEJN Series 364 is a Flat-Face quick-connect nipple with a built-in pressure eliminator. The nipple is according to and exceeds the demands in the ISO 16028 Standard for low- and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. The pressure eliminator allows for connection with residual/trapped pressure on the nipple side. The nipple Series 364 connects with couplings in Series 365, Series 366 and Series 362.The pressure eliminator nipples are also available in four other sizes; DN 6.3 (Series 264), DN 12.5 (Series 564), DN 16 (Series 664), DN 19 (Series 764). For steel couplings in accordance with ISO 16028 see Series 365. Stainless steel versions of the standard are available in Series 366. Series 362 features an interchangeable steel coupling designed for lower pressures.

Flow rate 44 l/min (9.7 GPM) @ 3bar ΔP **
Nominal flow diameter 10 mm (0.4")
Temperature range -30°C — +100°C (-22°F — +212°F)
Material nipple Steel (Zinc-Nickel)
Material seal Nitrile (NBR/PUR)
Connectability With static pressure up to 400 bar on the nipple side
Max. working pressure connected 400 bar (5801 PSI)
Max. working pressure disconnected 400 bar (5801 PSI)
Min. burst pressure connected 1200 bar (17404 PSI)
Min. burst pressure disconnected 1200 bar (17404 PSI)
Disconnection under pressure Not allowed
Comment Connects with couplings from Series 365, Series 366 and Series 362
Interchangeable with All brands dimensionally interchanging with ISO16028

(**) If the application is constantly above this flow rate for the respective coupling size, a larger coupling size should be considered to avoid too high a pressure drop. The couplings can handle a much higher flow rate but there is a risk of heat build-up in the system. In general, surge flows above the normal flow rate are not a problem. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards. All measurements are in mm.