NOTICE: ONLY FOR USE WHEN CUSTOMER HAS AN EXISTING METRIC MOTOR AVAILBLE FOR REUSE

Features and Benefits:
• Produce simultaneous pressure of +0.6 bar and vacuum of -0.6 bar.
• Designed for continuous operation, ease of maintenance, long vane life, maximum efficiency and low noise level.
• Standard equipment includes pressure and vacuum regulator valves, 5 micron paper cartridge inlet and exhaust filters, blast air aftercooler, flange mounted motor, lifting hooks, and BSP-NPT adapters.
• All KTA pumps are stocked with a single, forward facing exhaust vent, unless noted otherwise.

METRIC MOTORS NOTICE: KTA pumps with metric flanges and couplings use the same "B5" motor as the DCLF series and the CLFT-101-DV and CLFT-141-DV. If the your old motor is from one of these pumps and the KW rating matches the KTA spec listed below, we can sell you this pump without a motor. Otherwise you "MUST PURCHASE" the KTA with a motor when replacing any CL, TR, CLFT-41-DV, CLFT-61-DV, CLFT-81-DV, or competitive brand of pump.

NOTICE: ONLY FOR USE WHEN CUSTOMER HAS AN EXISTING METRIC MOTOR AVAILBLE FOR REUSE

Features and Benefits:
• Produce simultaneous pressure of +0.6 bar and vacuum of -0.6 bar.
• Designed for continuous operation, ease of maintenance, long vane life, maximum efficiency and low noise level.
• Standard equipment includes pressure and vacuum regulator valves, 5 micron paper cartridge inlet and exhaust filters, blast air aftercooler, flange mounted motor, lifting hooks, and BSP-NPT adapters.
• All KTA pumps are stocked with a single, forward facing exhaust vent, unless noted otherwise.

METRIC MOTORS NOTICE: KTA pumps with metric flanges and couplings use the same "B5" motor as the DCLF series and the CLFT-101-DV and CLFT-141-DV. If the your old motor is from one of these pumps and the KW rating matches the KTA spec listed below, we can sell you this pump without a motor. Otherwise you "MUST PURCHASE" the KTA with a motor when replacing any CL, TR, CLFT-41-DV, CLFT-61-DV, CLFT-81-DV, or competitive brand of pump.