Solberg Replacement Paper Element (2 Micron), 35 SCFM to 4705 SCFM (8000 m3/hr)

- Industrial Strength Replacement Paper Media Elements
- Continuous temperature minimum: -15° F (-26° C)
- Continuous temperature rating complete assembly maximum: 220°F (104°C)
- Filter change out differential: 10"-15" inch H2O above initial delta P
- Dust loading capacity is increased 40 % to 50% with prefilter
- Optimal sealing surface and design
- Less expensive and higher efficiency than many alternative media
- Optimal surface area per given size
- Higher efficiency than many alternative media
- Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal
- Standard 99%+ removal efficiency to 2 microns

Options (upon request):Polyester - 1, 4, 25 and 100 micron - HEPA - 99.97% D.O.P. efficiency to 0.3 micron - Stainless Steel Nomex - High temperature Nomex cloth - 99+% efficient, Reinforces by stainless steel wire mesh and expanded metal - Activated carbon - Prefilter heat stamping for custom imprinting

Suggested Applications: Please see attached specification sheet (canister applications)

Endcap Notes:
M = Molded plastisol
B = Closed one end with bolt hole, open on other end
G = Galvanized metal endcaps
N = Neoprene gaskets on open ends

Solberg Replacement Paper Element (2 Micron), 35 SCFM to 4705 SCFM (8000 m3/hr)

- Industrial Strength Replacement Paper Media Elements
- Continuous temperature minimum: -15° F (-26° C)
- Continuous temperature rating complete assembly maximum: 220°F (104°C)
- Filter change out differential: 10"-15" inch H2O above initial delta P
- Dust loading capacity is increased 40 % to 50% with prefilter
- Optimal sealing surface and design
- Less expensive and higher efficiency than many alternative media
- Optimal surface area per given size
- Higher efficiency than many alternative media
- Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal
- Standard 99%+ removal efficiency to 2 microns

Options (upon request):Polyester - 1, 4, 25 and 100 micron - HEPA - 99.97% D.O.P. efficiency to 0.3 micron - Stainless Steel Nomex - High temperature Nomex cloth - 99+% efficient, Reinforces by stainless steel wire mesh and expanded metal - Activated carbon - Prefilter heat stamping for custom imprinting

Suggested Applications: Please see attached specification sheet (canister applications)

Endcap Notes:
M = Molded plastisol
B = Closed one end with bolt hole, open on other end
G = Galvanized metal endcaps
N = Neoprene gaskets on open ends