Solberg LG-Series In-Line Air/Oil Separator Element
- At 100 psig (7 bar) operating pressure the pressure drop at nominal flow is approximately 3.6 psig (0.2 bar)
- Maximum operating pressure" 235 psig (16 bar)
- Elements withstand pressure differences up to 71 psig (5 bar)
- Easy Maintenance: Simply apply oil film on the gasket and tighten element by hand; no additional equipment is necessary (use strap wrench if preferred)
- Usage: rotary and piston compressors in order to eliminate coast for pressure vessels
- Spin-On Style Separator (Spin-On Air/Oil Separators)
- Service life of element is capable up to several thousand hours under normal conditions
- Zinc-plated steel housing and endcaps with zinc passivated flange
- Glass media for efficient air/oil separation
- Oil residual content of the compressed air can attain up to 3 ppm (3mg/m3) separation efficiency
- Continuous Temperature Minimum: -15° F (-26° C)
- Continuous Temperature Maximum: 220° F (104° C)
- Filter change out differential: 1.2 bar increase

Options (upon request): Special connections - Imprinting and blind units - Heads and adapters for separators - Separator elements with drains - Oil filters - contact for availability and sizes

Suggested Application: Compressor/Piston - Compressor/Screw

Solberg LG-Series In-Line Air/Oil Separator Element
- At 100 psig (7 bar) operating pressure the pressure drop at nominal flow is approximately 3.6 psig (0.2 bar)
- Maximum operating pressure" 235 psig (16 bar)
- Elements withstand pressure differences up to 71 psig (5 bar)
- Easy Maintenance: Simply apply oil film on the gasket and tighten element by hand; no additional equipment is necessary (use strap wrench if preferred)
- Usage: rotary and piston compressors in order to eliminate coast for pressure vessels
- Spin-On Style Separator (Spin-On Air/Oil Separators)
- Service life of element is capable up to several thousand hours under normal conditions
- Zinc-plated steel housing and endcaps with zinc passivated flange
- Glass media for efficient air/oil separation
- Oil residual content of the compressed air can attain up to 3 ppm (3mg/m3) separation efficiency
- Continuous Temperature Minimum: -15° F (-26° C)
- Continuous Temperature Maximum: 220° F (104° C)
- Filter change out differential: 1.2 bar increase

Options (upon request): Special connections - Imprinting and blind units - Heads and adapters for separators - Separator elements with drains - Oil filters - contact for availability and sizes

Suggested Application: Compressor/Piston - Compressor/Screw